Category

Components

Category

A long time ago, I made a video suggesting math was unnecessary to determine proper pull-up resistor values. Like most generalized statements, that suggestion is not always true. For example, in data buses like I2C, speeds like 400 kHz and 1 MHz are common. At those speeds, the pull-up resistor and the bus capacitance form an RC filter that fundamentally limits the data transmission speed. Or. It limits the range of pull-up resistor values. In…

What are aluminum polymer capacitors? These are a solid type of capacitor that replaces the liquid electrolyte with a solid polymer material. Sometimes you might hear these capacitors called “organic aluminum.” Technically, they are still “electrolytic” capacitors. However, the colloquial term of “aluminum electrolytic” refers to the traditional wet electrolyte-based capacitors. In this video, I meet with Amelia Dalton of EE Journal, and we discuss these capacitor types. Mouser and EE Journal developed the video…

Can you use voltage dividers as regulators? What if you add a Zener Diode? In this AddOhms episode, I show what happens when you try to power a complex circuit like an ESP8266 with a voltage divider instead of a regulator. (Spoiler: Get a voltage regulator.) This video tutorial is related to a write up I did recently on Zener Diodes. For questions or comments visit the AddOhms Discussion Forum. Behind the scenes A significant change for…

Op amps are one of the most versatile ICs in electronics. A purely analog device, they can be used for amplification, summing, integration, and a whole host of other circuits. AN-31 from Texas Instruments is 32 pages of op amp circuits. (Note: this document was created before TI acquired National Semiconductor.)

Even more amazing is that the author is Bob Pease. If you never heard of Mr. Pease, please spend a few minutes right now reading this TI page dedicated to him. His contributions to electronics are nearly immeasurable. (Sadly, he was involved in a car accident after attending the funeral of his equally famous engineering friend, Jim Williams.)

(Mirror)

The Zener diode is often used to create a reference voltage. In tutorials and even college texts, there are mentions of creating a Zener diode based regulator. The idea is that the Zener maintains a known voltage drop. The problem is that current matters. This post looks a quick Zener diode overview and shows what happened when I tried to power a microcontroller using a “Zener diode regulator.”