Probes on Bald Engineerhttps://www.baldengineer.com/tag/probesRecent content in Probes on Bald EngineerHugoen-USFri, 01 Apr 2022 23:23:13 +0000DIY Solder-In Oscilloscope Probes | Workbench Wednesdays #50https://www.baldengineer.com/diy-solder-in-oscilloscope-probes-workbench-wednesdays-50.htmlThu, 03 Feb 2022 00:19:00 +0000https://www.baldengineer.com/?p=8363When you cannot get an oscilloscope probe into a tight spot, can you just use a piece of wire? Sometimes. When signal integrity matters, you CAN use a low-cost DIY solder-in probe. These probes attenuate the signal and use an oscilloscope’s high-bandwidth 50-ohm input. James shows how to build some solder-in probes when they work and when they do not work in this video. Special thanks to Shabaz on the element14 community for the guide used here.

DIY Solder-In Oscilloscope Probes | Workbench Wednesdays #50