p-channel on Bald Engineer

7 MOSFET Myths and Misconceptions Addressed

Wed, 08 May 2019 13:03:24 +0000

The most popular AddOhms video is my short tutorial on MOSFET basics. In the years since I posted the video, people have sent me many questions. While answering those questions I’ve learned quite a bit as well. For example, in that video, I say that Vgs is the threshold to turn on the MOSFET. Well, it turns out, that is not entirely true. It is the threshold to turn it off! Oops. A minor point with a subtle difference, but a common MOSFET misconception.

Low side vs. High side transistor switch

Wed, 10 Apr 2019 13:45:02 +0000

A common task for a transistor is switching a device on and off. There are two configurations for a transistor switch: low side and high side. The location of the transistor determines the type of circuit and its name. Either transistor configuration can use a BJT or MOSFET. In this post, I draw the configuration for both transistor types, discuss which requires a driver, and explain why you would use either. If you are new to transistors, check out the resource links at the bottom. I have a few videos I made and some from element14’s The Learning Circuit, which do a great job introducing transistors.

P-Channel MOSFET Tutorial with only Positive Voltages

Thu, 09 Jul 2015 01:20:55 +0000

On every page of my blog, you might notice a chat window. If I’m not busy, we can chat in real-time. If not, the messages come to me by email. Here’s one I got from Matt the other day: Let’s talk a bit about how (and why) you would use a P-Channel MOSFET. Matt, and he’s not the only one, is probably asking this question based on the “myth” that P-Channel MOSFETs require “negative voltage” supplies.