MSO on Bald Engineer

Logic Analyzer Tutorial and Introduction

Wed, 09 Mar 2016 16:00:17 +0000

A DMM, or multimeter, is the go-to instrument for debugging most circuits. You probably already have at least one DMM on your bench for this reason. Me? I have three. But that’s a different story. Let’s talk about a Logic Analyzer. Digital signals represent two states: on (usually “1”) and off (usually “0”). A multimeter (DMM) may be of limited value for these signals. When using the DC voltage measurement, you can see “something” is happening, but not exactly what that “something” is. For example on a PWM pin, you’ll see the RMS Voltage change as you modify the duty cycle. However, you can not see if the signal is “ringing” when turning on and off.

Learn how to use a Mixed Signal Oscilloscope

Tue, 24 Sep 2013 02:15:33 +0000

When I teach the Electronics Measurements class at the TechShop in Austin, I take a lot of pride in showing off the Mixed-Signal Oscilloscope. We have a Rigol DS1102D as well as a standard DSO. To help illustrate the power of the combined digital and analog channels, I created a Mixed Signal Oscilloscope Demo Board, based on a counter, that has an issue that could be turned on or off. This board is also my first time making use of OSH Park’s PCB service.

MSO Demo Board

Mon, 26 Aug 2013 00:10:15 +0000

Last Update: 09/24/2013 Status: Done Github: https://github.com/baldengineer/Mixed-Signal-Oscilloscope-Demo-Board Abstract As a member of the TechShop in Austin, TX I teach a class on Electronics Measurements. The class includes a variety of test equipment like power supplies, DMMs, and Rigol oscilloscopes. One of the oscilloscopes is a Rigol DS1052D which is a “Mixed Signal Oscilloscope.” In addition to the two 100MHz analog channels, the scope also include 16 digital channel channels. It is a logic analyzer and oscilloscope in one!