ESD on Bald Engineerhttps://www.baldengineer.com/tag/esdRecent content in ESD on Bald EngineerHugoen-USThu, 31 Mar 2022 03:55:40 +0000Bald Engineer's ESD Must-Haves | Workbench Wednesdayshttps://www.baldengineer.com/bald-engineer-esd-must-haves.htmlWed, 05 Jun 2019 23:30:01 +0000https://www.baldengineer.com/?post_type=link&p=7843Electrostatic Discharge (ESD) damage can occur without you knowing it. That’s bad. However, the good news is that with little effort you can prevent it. Duratool has a kit of the most common tools for any electronics workbench. It includes a large mat, grounding cable, wrist strap, ESD-safe cleaner, and a simple electronic tester. Don’t get shocked by electrostatic discharge; add these simple tools to prevent it. This review is on a kit that includes:

Bald Engineer's ESD Must-Haves | Workbench Wednesdays

6 Simple Mistakes Electronics Beginners Makehttps://www.baldengineer.com/6-simple-mistakes-electronics-beginners-make.htmlMon, 30 Jun 2014 14:00:47 +0000https://www.baldengineer.com/?p=2456Sometimes the hardest lessons are the ones you have to learn multiple times. When getting started with Electronics circuits, there’s a handful of things that can ruin a day (or experiment.) Here are 6 mistakes I made when I got started, and mistakes I see in the beginner classes I teach. In fairness #6 isn’t one I did starting out, because Fritzing wasn’t around. However, it took me a while to learn the value of providing a schematic, even a simple sketched out block diagram.

6 Simple Mistakes Electronics Beginners Make