Electronic Load on Bald Engineerhttps://www.baldengineer.com/tag/electronic-loadRecent content in Electronic Load on Bald EngineerHugoen-USFri, 01 Apr 2022 23:25:22 +0000How to Measure Ripple Voltage on a Switch-Mode Power Supply | Workbench Wednesdays #51https://www.baldengineer.com/how-to-measure-ripple-voltage-on-a-switch-mode-power-supply-workbench-wednesdays-51.htmlTue, 01 Mar 2022 00:23:00 +0000https://www.baldengineer.com/?p=8365Measuring a switch-mode power supply (SMPS) with a DMM might show a stable voltage. But the same DC rail on an oscilloscope can show a completely different story! In this video, learn how to correctly set up an oscilloscope to characterize the noise an SMPS creates in a circuit.

How to Measure Ripple Voltage on a Switch-Mode Power Supply | Workbench Wednesdays #51

Electronic Load Basics | Workbench Wednesdayshttps://www.baldengineer.com/electronic-load-basics.htmlWed, 18 Sep 2019 15:15:24 +0000https://www.baldengineer.com/?post_type=link&p=7950During the Bench Power Supply basics video, I made use of my electronic load. An electronic load can sink current from power sources such as power supplies or batteries. Loads are useful to test a power supply’s design margin or verify a battery’s capacity. See how three different instrument options from ultra low-end to midrange to high-end compare. After this element14 Presents Workbench Wednesday video, you will understand how to use modes on an electronic load like constant current and constant resistance to make different measurements.

Electronic Load Basics | Workbench Wednesdays