Breadboard on Bald Engineerhttps://www.baldengineer.com/tag/breadboardRecent content in Breadboard on Bald EngineerHugoen-USFri, 01 Apr 2022 22:55:52 +0000Compare Ideal vs. Real Filter with an LCR Meter | Workbench Wednesdays #42https://www.baldengineer.com/compare-ideal-vs-real-filter-with-an-lcr-meter-workbench-wednesdays-42.htmlThu, 05 Aug 2021 22:51:00 +0000https://www.baldengineer.com/?p=8344Compare the ideal and measured cut-off frequency for a filter with a handheld LCR meter. Unlike a DMM, these meters apply an AC signal (from 100 Hz to 100 kHz) to determine the reactive component of an inductor, capacitor, or resistor. A simple example here is a low-pass filter. See how the ideal and measured cut-off frequency varies. And THEN, see how it compares between a PCB and a Breadboard.

Compare Ideal vs. Real Filter with an LCR Meter | Workbench Wednesdays #42

Electronics: Introduction to Breadboardshttps://www.baldengineer.com/electronics-introduction-to-breadboards.htmlWed, 18 Dec 2013 23:32:05 +0000https://www.baldengineer.com/?p=2134Soldering every circuit you build probably isn’t practical. At some point you are probably going to want to use some type of temporary method to connect different components together. One of the popular methods is using a breadboard. This simple (and cool) looking device only needs a few instructions before you can begin Layout of a Breadboard There are various colors, shapes, and sizes that breadboards come in. However, they all generally look about the same and have the same basic functionality. The board shown in Picture 1 is a pretty common “medium” sized breadboard.

Electronics: Introduction to Breadboards