BJT on Bald Engineer

What Active Components Do You Need? | Workbench Wednesday #29

Thu, 08 Oct 2020 21:43:00 +0000

Active components like transistors, BJTs, MOSFETs, and integrated circuits (ICs) make it possible to control circuits. This video explains the must-have NPN and PNP BJTs. For MOSFETs there are a couple of N-Channels and P-Channels to consider. Basic ICs include some digital logic stuff from the 7400-family as well as the venerable 555-timer to have on-hand. We did not forget Op-Amps either. Spoiler: We do not recommend the ua741!

Watch this video on YouTube

DCA Pro Transistor Tester Review | Workbench Wednesdays

Wed, 07 Aug 2019 14:19:09 +0000

When it comes to transistors, there are only so many things a multimeter can measure. The DCA Pro from PEAK Electronics makes short work of testing parts like a transistor. This small device can determine pinout, component type, and essential parameters in a matter of seconds. Not only that but it can be connected to a (Windows) PC and draw parameter curves. Check out the video review to see how the device and software work. Then head over to the element14 page where you can download a zip file full of example parts I measured for you. Use the free DCA Pro software to open them.

Watch this video on YouTube

Low side vs. High side transistor switch

Wed, 10 Apr 2019 13:45:02 +0000

A common task for a transistor is switching a device on and off. There are two configurations for a transistor switch: low side and high side. The location of the transistor determines the type of circuit and its name. Either transistor configuration can use a BJT or MOSFET. In this post, I draw the configuration for both transistor types, discuss which requires a driver, and explain why you would use either. If you are new to transistors, check out the resource links at the bottom. I have a few videos I made and some from element14’s The Learning Circuit, which do a great job introducing transistors.

Answering BJT questions with Karen on element14's The Learning Circuit

Wed, 02 Jan 2019 17:29:28 +0000

Over on element14, Karen hosts The Learning Circuit. It is a tutorial show geared towards learning STEM basics. So far she has covered subjects like soldering, diodes, and how to make a DIY electromagnet. She did a great job on introducing BJTs and how they work. While I thought she provided a clear explanation of the internal workings, some members of the element14 community still had questions. She invited me on to revisit BJTs and transistors to (hopefully) clarify the connection between how transistors physically work and how to use them.

Watch this video on YouTube

The 4 best transistors to keep in your parts kit

Mon, 21 Apr 2014 15:00:38 +0000

When your project needs a transistor, there are tons of choices. Which makes answering the question “Which transistor should I use or buy?” a daunting task. Fear not, before wading through spec sheet after spec sheet, consider one of these four general purpose transistors. Every electronics enginerd’s toolbox should have a few of each. Transistors are one of the most versatile discrete components in electronics. In digital circuits, they switch on and off while in analog circuits they are used to amplify signals. For most projects, they are used to turn on a load that would kill the I/O pin of a microcontroller or microprocessor. For most circuits either a BJT or MOSFET can be used, depending on the load current you need to switch.