Transistors on Bald Engineer

DCA Pro Transistor Tester Review | Workbench Wednesdays

Wed, 07 Aug 2019 14:19:09 +0000

When it comes to transistors, there are only so many things a multimeter can measure. The DCA Pro from PEAK Electronics makes short work of testing parts like a transistor. This small device can determine pinout, component type, and essential parameters in a matter of seconds. Not only that but it can be connected to a (Windows) PC and draw parameter curves.

Check out the video review to see how the device and software work. Then head over to the element14 page where you can download a zip file full of example parts I measured for you. Use the free DCA Pro software to open them.

7 MOSFET Myths and Misconceptions Addressed

Wed, 08 May 2019 13:03:24 +0000

The most popular AddOhms video is my short tutorial on MOSFET basics. In the years since I posted the video, people have sent me many questions. While answering those questions I’ve learned quite a bit as well. For example, in that video, I say that Vgs is the threshold to turn on the MOSFET. Well, it turns out, that is not entirely true. It is the threshold to turn it off! Oops. A minor point with a subtle difference, but a common MOSFET misconception.

Low side vs. High side transistor switch

Wed, 10 Apr 2019 13:45:02 +0000

A common task for a transistor is switching a device on and off. There are two configurations for a transistor switch: low side and high side. The location of the transistor determines the type of circuit and its name. Either transistor configuration can use a BJT or MOSFET.

In this post, I draw the configuration for both transistor types, discuss which requires a driver, and explain why you would use either. If you are new to transistors, check out the resource links at the bottom. I have a few videos I made and some from element14’s The Learning Circuit, which do a great job introducing transistors.

Answering BJT questions with Karen on element14's The Learning Circuit

Wed, 02 Jan 2019 17:29:28 +0000

Over on element14, Karen hosts The Learning Circuit. It is a tutorial show geared towards learning STEM basics. So far she has covered subjects like soldering, diodes, and how to make a DIY electromagnet. She did a great job on introducing BJTs and how they work. While I thought she provided a clear explanation of the internal workings, some members of the element14 community still had questions.

She invited me on to revisit BJTs and transistors to (hopefully) clarify the connection between how transistors physically work and how to use them.