https://www.baldengineer.com/category/projects/arduino-power-simulatorRecent content in Arduino Power Simulator on Bald EngineerHugoen-USMon, 22 Dec 2014 02:23:58 +0000https://www.baldengineer.com/arduino-power-simulator.htmlSat, 16 Jun 2012 02:00:01 +0000https://www.baldengineer.com/?page_id=891How to use this simulator: Press the power button for the desired connections. For example, for USB-only, press the power button near the USB connector. Enter a voltage for the enabled supplies. Use “Reset” to start over. The voltage at the other pins will be calculated. Note: This simulator does not take into account current loading. Examples Enter 12.0 volts for the Barrel Jack. Watch what happens to Vin, 5V and 3.3V. Enter 5.0 volts for the Barrel Jack. Watch what happens to Vin, 5V and 3.3V. Reset